LIFESENSE BREATHE SPACER FOR INHALER

MD1013

LIFESENSE BREATHE SPACER FOR INHALER

MD1013

Product GTIN:
5099390418316
Quantity Per Pack:
1

The LifeSense® Breathe Spacer is a device used with an inhaler to make breathing in medicine easier and more effective. Also known as a holding chamber, the device keeps the medicine in place briefly, allowing you to inhale it more deeply into your lungs. Using a spacer can help ensure you get the right amount of medicine, reduce waste, and make using an inhaler easier for both adults and children.

FEATURES:

  • Lightweight and Portable for everyday use
  • Easy to assemble and disassemble for cleaning
  • Use with adult or child mask, or directly via the mouthpiece
  • Latex-free Materials

INSTRUCTIONS FOR USE

Carefully examine the product for damage, missing parts or foreign objects. Remove any foreign objects prior to use.

  1. Hold the base of the spacer and remove cap from the top of the chamber.
  2. Place the, suitably sized, mask over the chamber mouthpiece until it fits securely.
  3. Remove cap from the metered dose inhaler (MDI), shake before use and insert device into the back piece of the chamber.
  4. Hold mask against the face, press MDI and inhale slowly. Keep mask in place and breath in and out through the chamber for 5-6 breaths.
  5. If not using the mask, place lips around the mouthpiece, press MDI and inhale slowly*. Hold breath for 5-10 seconds.

*Slow down inhalation if you hear a tone from the device.

When using the mask, ensure it completely covers both the nose and the corners of the mouth. If not fitted correctly, aerosol may escape, leading to reduced effectiveness of the treatment and possible under-dosage. For potential side effects caused by escaping aerosol, please refer to the medication's instructions for use.

  • Children under 18 months: Inhale 4-6 times.
  • Children over 18 months: Take 2-4 deep breaths.
  • Adults: One deep breath is sufficient to inhale the medication from the spacer.

If your doctor has prescribed more than one spray, wait one minute before repeating steps 3 to 5.

Intended Use: This device is intended for use by treating chronic obstructive pulmonary disease and asthma with medicine-assisted inhalation device. The device is a holding chamber, and is used in conjunction with medication sprays or metered dose inhalers (MDI) in the treatment of diseases of the airways.

Precautions: For single-patient use only, do not share with others. Not made with natural rubber latex. Check all parts before use, do not use if damaged or cracked. Use only with inhalation medicines prescribed by your healthcare provider.

Storage: Keep the device and its accessories in a dry, dust-free location, away from continuous exposure to direct sunlight.

Information Data Sheet
User Manual